Wedged windows are intended for beam sampling applications. Interferometer Flats (IF), with a small wedge of 30’, are made to minimize interference effects between the surfaces and reduce back reflection. Meanwhile, Large Wedges (LW) have an angle wedge of 1°, 2°, or 3° and are made to prevent interference due to stray back reflection or beam deviation. OptiSource Interferometer Flats and Large Wedges are available as coated optics. To select a coating please see the coating offerings in our catalog; if your dimensions are not listed, please call OptiSource Technical Sales regarding a quotation for your prototype or OEM requirement.

Specifications
Surface Figure λ/10 @ 633nm
Surface Quality: 10-5
Diameter Tolerance: +0.00/-0.25mm
Thickness Tolerance: +/- 0.25mm
Wedge: Specified Wedge +/- 5 minutes
Wedge Identified by Arrow at thickest point of piece
pointing to the parallel (non-wedged side)
Chamfer: 0.35mm X 45° Typical
Clear Aperture: Central 85% of Dimension

Interferometer Flats Configurations

Product Number
Diameter
(mm)
Thickness
(mm)
Surface Quality
Surface Figure
Material
IF-1025-XX
25.40
6.35
10--5
λ/10 @ 633nm
"UV, BK-7"
IF-1037-XX
25.40
9.53
10--5
λ/10 @ 633nm
"UV, BK-7"
IF-2025-XX
50.80
6.35
10--5
λ/10 @ 633nm
"UV, BK-7"
IF-2025-XX
50.80
9.53
10--5
λ/10 @ 633nm
"UV, BK-7"
IF-3050-XX
76.20
12.70
10--5
λ/10 @ 633nm
"UV, BK-7"
IF-4050-XX
101.60
12.70
10--5
λ/10 @ 633nm
"UV, BK-7"

 

Large Wedges Configurations

Product Number
Diameter
(mm)
Thickness
(mm)
Surface Quality
Surface Figure
Material
LW-X-1025-XX
25.40
6.35
10--5
λ/10 @ 633nm
"UV, BK-7"
LW-X-1037-XX
25.40
9.53
10--5
λ/10 @ 633nm
"UV, BK-7"
LW-X-2037-XX
50.80
9.53
10--5
λ/10 @ 633nm
"UV, BK-7"
LW-X-3050-XX
76.20
12.70
10--5
λ/10 @ 633nm
"UV, BK-7"